Contact Us Button

slate repair button

New Slate Roofs

Slate Roof Leak Help

Roof Inspections

Sign-up for Savings!


Subscribe

* indicates required

Powered by MailChimp

Latest Posts

How to Repair a Slate Roof

Article Index

One of the unique features of a slate roof is that a slate roof is easily repairable. A slate roof is made up of thousands of individual pieces of natural slate. The combination of individual pieces of slate and separate flashing components allow repairs to be made in localized areas without replacing the entire roof.

 

Individual pieces of slate or areas of damaged slate can be replaced since the slates are not connected in anyway to the slates around them. This unique feature of slate (and tile) roofs makes it important not to use roof cement or tar (not to mention caulk) to repair slate roofs in areas other than at the hips or ridges.

The photograph  below shows a valley coated in roof cement. The adjacent slates were also coated. Normally, when a valley is leaking, the valley metal should be removed. To do this, the slates around the valley are removed and salvaged for re-installation. In this case, slate cannot be salvaged because now they are connected to all of the slate around them making a repair more costly.


Wherever possible, slates should be fastened to the roof using copper nails and hooks. Copper nails can be used when replacing a larger continuous area of slate. Hooks can be used when replacing individual slates in areas other than the ridge and starter course. For broken slate in the starter course, the slate in the second row can be pulled and the first row nailed and then the second row can be hooked. The first few rows of slate is an area vulnerable to leaking and ice damming.  Creating additional holes in slates in this area using the nail and bib method is a bad idea. Nailing and bibbing is a repair that involves punching a hole in the slate that is going to be used as the replacement slate, nailing the slate in place between the keyways,  and then placing a sheet metal "bib" over the nail.


 


 

 

 

 

 

 

 


 

 

Tools


 

Having the right tools for the job is the first step to correctly done slate repairs. For the most basic slate repairs, a slate hammer, slate ripper and a supply of slate hooks and 1 1/2" and 2" copper nails are necessary.

 

Pictures of Slate Tools The slate hammer will typically have a small square end for hammering nails and slate hooks into place with a sharply pointed opposite end used for punching holes and scoring the slates. At the top of the hammer are two teeth used for pulling nails. Finally, the shank of the hammer has an edge used for cutting slates. A "T" stake is used for in conjunction with the cutting edge of the slate hammer for cutting the slates.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 


The Repair
 

Picture of use of slate ripper pulling out slate.  The slate with the hole in the middle needs replacement. Here a slate ripper is slid under the slate and the nails ripped or pulled out. The slate is held in with two nails. Hooks at the end of the slate ripper can be used to yank out or break the nails.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 



 


Here, debris is pulled out and disposed. The ripper is used to pull out any debris still under the other slates.

 

 

 

Picture of Slate Debris
 


 


 


 


 


 


 


 


 


 

 

 

 

 

 

 

 


 


Here, a galvanized slate hook is installed. Some installers will use a stainless steel hook. We find that the stainless will remain shiny and catch the sun, resulting in an easily visible slate repair. The galvanized hooks will actually turn a dull gray and blend into the roof while at the same time, lasting for many years. Copper hooks have also been available, but they can be too soft to nail into old sheathing.


 

A slate hook is being installed in the roof.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 


The completed slate repair. If a group of slate in a continuous area need to be replaced (above a leak for instance), the slates to the bottom of the group can be nailed and the slate few slates at the top can be hooked.


 

 

Better Business Logo

3rd Party Reviews

Remodelers, home builders, and real estate developers rely on GuildQuality's customer satisfaction surveying to monitor and improve the quality of service they deliver.

slaterepair3.jpg

Slate Book

Buying and Maintaining a Home with a Slate Roof

What Others Are Saying